Metal Stamping Services

Metal stamping, also referred to as metal pressing in some industries, is the process of creating two-dimensional metal components from a sheet of metal using a stamping tool or die. Raw pieces of unblemished sheet metal are fed through a stamping press and altered by the die to produce a high volume of identical components. Metal stamping is a quick process that can produce a high volume of identical components in a short amount of time.To get more news about metal stamping china, you can visit tenral.com official website.

Blanking involves cutting pieces out of a piece of sheet metal using a die. It creates clean components, or blanks, that can undergo further processing by the stamping press or other machinery.

Coining
During this process, a technician places a piece of metal between a die and punch in a stamping machine, and then uses the tip of the punch to penetrate the material and bend it. This process is repeated to relieve internal stresses throughout the component. When flexed, a coined material should not exhibit any spring-back effects.

Curling
Curling is a technique wherein a hollow and circular roll is introduced to the component. The curl is stronger than the rest of the component and safer to handle.

Drawing
Primarily used in the creation of electronic components, drawing is a process that uses tensile force to shape the component into a desired thickness and shape. During the drawing process, blanks are drawn over a die, slowly stretching them and manipulating them into a new structure.

Embossing
Blanks can be embossed by both raising and recessing the sheet metal components. Embossing is a process referring to the creation of recessions or protrusions in the component, which is achieved by passing the blank along a roller die or against a die with the desired shape.

Posted by: wisepowder at 03:26 AM | No Comments | Add Comment
Post contains 309 words, total size 2 kb.